Equipment Recommendations - The Home For New System and Upgrade Advice

Quick connecting question: Do i connect the StudioPhono to the Tuner and which one do i connect the subwoofer to?

m2backpanel.jpg
 
You will use RCA cables to connect from the Pre Out jacks to the inputs on your subwoofer.

I can’t see a sub woofer out on that pic the amp so I’d do an rca run to the line in on the sub. @HiFi Guy would you connect it to the pre-out or the tape out for line level?

Guess i need to buy an RCA cable tomorrow because i have a Argon Audio Red Edition SC-1 that went from the sub to the Onkyo receiver and i'm guessing that won't work now?
 
Looks like i might have hit another snag. Since i bought the Musical Fidelity M2si from Analogue Seduction, it comes with a UK power cable. The UK to DK adapter i bought might not be powerful enough as the MF instructions manual says it needs a 13 amp fuse or plug and the adapter is only 10 amp, i think.

 
Looks like i might have hit another snag. Since i bought the Musical Fidelity M2si from Analogue Seduction, it comes with a UK power cable. The UK to DK adapter i bought might not be powerful enough as the MF instructions manual says it needs a 13 amp fuse or plug and the adapter is only 10 amp, i think.


Worst case you can try it and the fuse blows. It may not though. What you have may get you through until you get a suitable adaptor.
 
Worst case you can try it and the fuse blows. It may not though. What you have may get you through until you get a suitable adaptor.

The UK plug will have the 13amp fuse built into it anyway, as they all do, I don’t envisage that only letting through a 10 amp current is going to cause it to blow because here it’s have the full 240v mains feed on a ring circuit from a 32amp breaker.
 
Back
Top