Matt M
Santa Extraordinaire
Weird, maybe I'm just used to the vacuum...but this thing is so quiet I barely even notice it in the other room. Really don't if I have music playing.
New ultrasonic vinyl cleaner in the works: Humminguru
- Thread starter espendo
- Start date
debianlinux
Well-Known Member
I can sit in the room with it and work. It does kinda ruin music even played in another room though. I think there's a lot I can't hear but the parts I can hear I hear exceptionally well to compensate or something.
Diaper Baby Escape Plan
Well-Known Diaper Baby
I actually find the drying louder. Maybe I got the dud and you're getting more ultrasonics! We may also have different sensitivities.
Edit: to be fair, I'm also comparing it relative to my RCM. And then again, the RCM only really makes noise during the vacuum phase.
MikeH
Well-Known Member
Its a different kind of noise to me than the vacuum cleaner. the vacuum cleaner is definitely louder but doesn't hurt my ears if that makes sense. the HG is like nails on a chalkboard while it's in the ultrasonic cleaning mode and i ended up putting it in our guest bathroom and closed two sets of doors so that we can't hear it and we can STILL hear it outside a little bit.
folsom_lives
pretty_lil_dirt_boi
Definitely found that I won't be getting rid of my Squeaky Clean, if for no reason other than the turntable, TTVJ fluid, and brush. Had to break it out to really scrub some gunk out of the first few tracks of a record. Except I didn't vacuum it off, I just did a quick distilled rinse into the sink and then popped it right into the Guru. Definitely got rid of 90% of the gluey stuff and a few of the persistent skips.
Shhhhhh don't tell HappyWell that a minute amount of TTVJ made it into the tank.
Shhhhhh don't tell HappyWell that a minute amount of TTVJ made it into the tank.
MikeH
Well-Known Member
Mr Moustache
Well-Known Member
I started using a 0.001% Triton X-100. I see a tiny bit of suds, so I wouldn't really go higher than this. If you don't have precise measuring equipment, it will be easier in larger volume, otherwise you might just end up with something too concentrated maybe.
MikeH
Well-Known Member
Yea I think that’s my main question. I think the tergitol I have is meant to be 1:400 to distilled water. I do have a little syringe that came with the tergitol to measure out ml I believe. Just wasn’t sure if I should pour it into a gallon of distilled water or not or try to just add it to the water tank on the HG. I read if you add too much tergitol it may create a residue on the records that is difficult to get off?
debianlinux
Well-Known Member
I've been using a squirt of my previous record cleaning solution which is a combination of isopropyl, triton X-100, and Hepastat 256 heavily diluted in distilled water. I'm putting in about half of what I would squirt onto one side of one record for the cleaning in a squeaky clean. It should act as wetting, very light solvent, and impart antistatic/antibacterial properties without mineralizing in any lines. It's not enough to even cover the bottom of the reservoir before I add the DH2O. Also seeing the tiniest bit of suds.
debianlinux
Well-Known Member
I would treat the gallon and just add from the jug to the reservoir instead of trying to minutely treat each reservoir.
Mr Moustache
Well-Known Member
How viscous is Tergitol? Triton X is pretty viscous, so it would not be easy to dissolve properly in the tank I think. You would need to agitate to make sure it’s properly in solution. That may be easier done in the galon jug I think.
Mr Moustache
Well-Known Member
Plus, all the batches cleaned with that galon will be similar, whereas if you add everytime to the tank you will end up with a greater variability in between each batches
tvham
Well-Known Member
It happens with me from time to time and if there are just a few I use a spin clean cloth to wipe it off otherwise I’ll pop it back in to dry longer. I have made an effort to dry the top of the machine of any water that may have dropped on it while filling the basin, though being maybe that was getting on the record during the dry cycle?
debianlinux
Well-Known Member
I get some drops outer and or inner on like 70% of records. Humidity is low right now so curious how it works in the summer. I either wipe with a cloth or get it with the carbon fiber brush if there's dust too. I've noticed dusty going in will leave some latent but easily removed dust. I believe it just floats in the water and gets left behind as it drains then blows around during drying.
uvwxVinyl
Well-Known Member
It's here!
Probably won't open it up until Xmas though
Edit: too many pages to read through. Can someone summarize the forum "starter kit" for the HG? What else do I need beside Distilled water and a microfiber cloth?
Edit 2: and what's the best practice with the distilled water? Re-use a few times or should you refill after each use?
Probably won't open it up until Xmas though
Edit: too many pages to read through. Can someone summarize the forum "starter kit" for the HG? What else do I need beside Distilled water and a microfiber cloth?
Edit 2: and what's the best practice with the distilled water? Re-use a few times or should you refill after each use?
Last edited:
Joe Mac
Well-Known Member
That’s it distilled/deionised water and a cloth.
Quite a lot. Unless the water is getting noticeably dirty I’ve been getting 30-40 a tank. I do top it up after 10 because the water level drops a little as you use it. I do empty it at the end of every day though.
The other thing is to clean the filter and the tank at the end of every session .
folsom_lives
pretty_lil_dirt_boi
30-40! Holy moly. I've been doing about 5-10 only because that's all I can physically do in the amount of time I have left in the day.
Joe Mac
Well-Known Member
Still working from home lol!