Slimwhit33
Well-Known Member
What the actual…. I’m trying to figure out.. how.
So…I’m fucked?What the actual…. I’m trying to figure out.. how.
Oh it’s almost a perfect snap off of some plastic materialNot sure tbh. Going to go take a look at my arm real quick…
Sorry to hear that.Oh it’s almost a perfect snap off of some plastic material
Sheesh!! So sorry to hearOh it’s almost a perfect snap off of some plastic material
Did you get it repaired? And if yes where at ?What a pain . You mention that the part appears to be a plastic material . I had a MoFi turntable where the stop for the anti-skate had been broken off and the material was a cast aluminum type of material. This part can be seen in your picture in the upper right and is attached to the base which your broken part is also attached .
Were you able to contact MoFi or find someone to fix the armDid you get it repaired? And if yes where at ?
Emailed but haven’t heard shitWere you able to contact MoFi or find someone to fix the arm
You might be bumping up against holiday hours at MoFi, but I'd go ahead and give them a call.Emailed but haven’t heard shit
Which size did you get for your UltraDeck. I like the idea of giving my $ to a small company vs Audio Technica who won’t likely miss my tiny contribution to their bottom line.I use a lifter made in Canada called the Trulift and its very well made and works and looks good. The owner provides great support .It comes in a number of different heights and models based on your TT
View attachment 149294TRU-LIFT
Automatic tonearm lifter, gently lifting the needle at the end of the record.www.integrityhifi.ca
In the past I would assume the VTA is set for the MoFi carts, but with the Gold having a different body I would recommend checking it to be sure.After using this forum to close on what my next “last deck ever” would be, Inthought I’d introduce myself. First, thanks for all the fabulous insights and observations. It made my choice far easier knowing a healthy community of owners exists.
Today I picked up an UltraDeck and an UltraGold MC cartridge. I’m waiting on a MoFi Geodisc to set up the new cart. Oh the agony of waiting.
It will feed into either a Puffin or a Parasound JC 3 jr depending on which room it ends up in.
My question for this group is about the UltraGold cart. Documentation online is…scarce. If anyone has one can you confirm that the factory set VTA for the UltraDeck shouldn’t need adjustment?
Thanks in advance for any insights.
I ended up using the number one , but the measurement was right on the boundary between the number one and two . I would strongly suggest that you do the measurements found on the web site and if any questions email Carlos as he is very helpful .Which size did you get for your UltraDeck. I like the idea of giving my $ to a small company vs Audio Technica who won’t likely miss my tiny contribution to their bottom line.
Thanks!
I meant to attach a link to the truelift web site but did not so here it is . Lots of info and videos on measurements , ect .Which size did you get for your UltraDeck. I like the idea of giving my $ to a small company vs Audio Technica who won’t likely miss my tiny contribution to their bottom line.
Thanks!