Mather
Unknown Member
Art store yo. I use them for the washers under my clamp on my TT.
New ultrasonic vinyl cleaner in the works: Humminguru
- Thread starter espendo
- Start date
McGlam
Well-Known Member
something with a soft side and a sticky side?
Mather
Unknown Member
In that case, Home Depot and grab the large felt pads for furniture legs. They can come in large squares, cut to size.
Russ I
Well-Known Member
I had a record that wouldn't spin a few days ago and I used one finger to put pressure on the roller housing (left side facing the HumminGuru) toward the center (left-to-right) of the unit and that did the trick (though my finger didn't enjoy the experience!). That leads me to believe that anything between the roller housing and the side of the unit that's the right thickness will get the job done. A small piece of paper folded a couple of times, a small piece of a matchbook....anything that will serve the purpose of moving the roller housing out just a smidgen from the side of the unit it snaps into.
kvetcha
Chet Hanks' Filmography Buff
it’s just fabric, I promise it can’t hurt you.
dhodo
Well-Known Member
Here's what I do. No tinkering, just something that can't damage the record that puts a little pressure toward the other roller. Not sure if it would make you more or less comfortable, but I don't see how it could cause anything negative.
I think my felt is from an arts and crafts store. No sticky side. Just something I tried that was near the machine.
debianlinux
Well-Known Member
Shim. The word is shim.
dansomeone
Well-Known Member
It works
dirty hands
Well-Known Member
Need one of these little fuckers. What time would this be in PST??
dhodo
Well-Known Member
I believe that is 8pm PST tonight.
BazookaTooth
Well-Known Member
i did , they got some coming !They don’t! Which is a pain. There is a European dealer but someone, me, bought the last two bottles and they haven’t restocked since! Might be worth hitting them up seeing if a restock is coming.
Twelve Inch | Vinyl Record Display | No frames or Visible Support
At Twelve Inch, we’ve reimagined the vinyl record display. Our frameless design, featuring no visible support, allows you to easily decorate your living spaces with your vinyl records. Elevate your home decor by embracing the beauty of decorating with vinyl records, and turn your space into a...twelve-inch.com
wait , why am i telling you ?
Joe Mac
Well-Known Member
Oldwhitelincoln11
Well-Known Member
So are these holding up? No issues? Better than the project machine?
kvetcha
Chet Hanks' Filmography Buff
@folsom_lives had issues with his, though they are taking care of it for him.
I believe they’re holding up well for everyone else. I know @Joe Mac has cleaned hundreds of LPs in his.
Joe Mac
Well-Known Member
Yeah I’ve cleaned over 1500 and it’s holding up well. I don't think there is a seal between the bath and the blue plastic bit above it so if you overfill it, it does leak. Beyond that no issues at all here!
jamieanderson1968
ninniest jackaninny
Those of you who have the 7/10in adaptors, are these cleaning as well as a regular lp? How are you dealing with 7in that have the large spindle hole?
dhodo
Well-Known Member
I haven't had any issues with over 600 albums cleaned, quite a few 2xLPs so more discs than that, but I haven't kept count. Personally can't compare to other machines but I am happy with it.
debianlinux
Well-Known Member
I don't have the adapters and would gladly sell whatever 7/10 records I was stupid enough to buy. That said, my cursory understanding is that their adapters grip the record at the lead-in edges and thus would be completely agnostic about the spindle hole size. In other words, the adapters begin at the outside edges of the records and increase the effective diameter to 12" which the machine itself only accommodates.